Your Cart


Brand: Doepfer Model: DOEPFER-A-101-2
A-101-2 is a vactrol based combination of Low Pass filter (LP) and VCA and was inspired by the Buchla module 292. The term "Low Pass Gate" was created by Don Buchla and stands for a module that can be switched between low pass and VCA. The control (manually and via external CV) is responsible for fr..
Ex Tax:83.19€
Brand: Doepfer Model: DOEPFER-A-131
Modules A-130 and A-131 provide voltage-controlled amplification. For audio signals, you would normally use the exponential VCA (A-131), and for control voltages, the linear VCA (A-130). It doesn't always have to be that way, though.The amount of amplification the VCAs provide is determined by the v..
Ex Tax:63.03€
Brand: Doepfer Model: DOEPFER-A-132-4
Module A-132-4 contains four identical voltage controlled amplifiers (VCA) with exponential control scales. Each VCA has two control voltage inputs (C1, C2), a signal input (In) and a signal output (Out). The control voltage inputs C1 and the signal inputs can be normalled by means of internal jumpe..
Ex Tax:84.03€
Brand: Doepfer Model: DOEPFER-A-133
A-133 is a special dual voltage controlled amplifier that enables both positive and negative amplifications. Negative amplification means in this context that the signal is inverted. The main application of the module is the processing of control voltages, e.g. ADSR or LFO but the module can be..
Ex Tax:63.03€
Make Noise Optomix REV.2 Make Noise Optomix REV.2
ΗΟΤ Pre-Order
Brand: Make Noise Model: MAKE-NOISE-OPTOMIX-REV-2
A two channel Low Pass Gate, providing simultaneous voltage control over amplitude and frequency content of a signal. It is in essence, a Voltage Controlled Filter Amplifier (VCFA) that has an extremely organic response to control signals.The Low Pass Gate is a classic West Coast synthesis circuit.-..
Ex Tax:189.08€
Showing 1 to 5 of 5 (1 Pages)