Multiples - Converters

Buffered MultThe 2hp Buff is a buffered multiple capable of splitting an input signal to multiple outputs. Due to its active architecture, inputs retain their full integrity as they are copied to multiple destinations. One input signal can be copied to six outputs, or two inputs can be copied to thr..

The Buff Mult is a buffered multiple with LED indicators to show positive and negative voltages. Using wide bandwidth opamps, it functions as a dual 1-to-3 or a single 1-to-6 mult for audio, video, or CV signals.Basic features:Two independent buffered multiples, normalized togetherEach channel has o..

The Listen Four is a four channel stereo mixer with line, modular, and headphone outputs. Two mono channels with Pan knobs and two stereo channels with dual inputs provide optimal compatibility with both stereo and mono signals. The Listen Four can be daisy-chained to other Listen modules to create ..

CV / octave shifterThe ACL Octave is a processing module, designed for, but not limited to instant precise transposing of V/Oct CVs up or down. The module provides three high impedance inputs, one low impedance inverting output and four low impedance non inverting outputs. By the means of a high qua..

Mutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing.Vactrols on the circuit gives to the switching a pleasing decay for both audio and modulation as well a totally click fre..

Clock Multiple, Conditioner, and Divider in a compact 2HP formatDistribute your clocks throughout your system using minimal rack space.The first three outputs maintain the same frequency as the input, while outputs 4 to 7 provide time divisions of 1/2, 1/4, 1/8, and 1/16.The active topology allows y..

Dual Multiple & Unity MixerMimix is a handy utility for copying and combining signals in eurorack systems. The module features three sections: two buffered multiples each with an augmented fourth output, and a 4-input unity summing mixer.Features- 1 to 4 buffered multiple with inverted 4th copy-..

Convertible multiple, configured as 4 and 5 connected jacksThis "multiple" is a passive module that splits up signals in order to feed one output to more than one input. It is preconfigured with two groups of four and five connected jacks, but it can be converted into three other configurations.The ..

Convertible multiple, configured as CV busThis "multiple" is a passive module that uses to multiples that are connected with a 6 pin ribbon cable to create a simple CV bus. But can be converted into three other configurations.The special thing about our multiples is that they have nine jacks and are..

Convertible multiple, configured as 3/3/3This "multiple" is a passive module that splits up signals in order to feed one output to more than one input. It is preconfigured to have three times 3 connected jacks, but it can be converted into three other configurations.The special thing about our multi..