Multiples - Converters

Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Thoug..

Two multiples with one 1/4 jack socket and two 3.5mm jack sockets each, upper multiple is wired monophonic, lower is wired stereophonic.For more detailed information please look at the English user's guide: A181_man.pdfBreite/Width: 4 TE / 4 HP / 20.0 mmTiefe/Depth: 30 mm (gemessen ab der Rücks..

Module A-182-1 is a simple passive multi-connector similar to the multiples modules A-180-1/A-180-2. In contrast to modules A-180-1/2 each socket is equipped with a 3-position switch that allows to connect the corresponding socket to the internal bus #1 (left position), bus #2 (right position) ..

module a-185-2 is a precision control voltage adder/buffer. precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of vcos (e.g. from keyboard + sequencer 1 + sequencer 2).the module is equipped with four..

OVERVIEWA good old passive 2x4 multiples in only 3HP - the perfect choice for the customer who wants to implement a genuine Verbos splitter his all-Verbos system, alone for the sake of completeness.DETAILSAs all pulse outputs on Verbos modules are "floating diode" you can use a passive multiple also..

Need more OR?  The Combine-OR is an 8 channel OR-Combiner with 4-inputs and 1-output per channel.The Combine-OR allows the user to combine gates, triggers and other logic signals into a single combined OR output.There are 8 numbered rows that can be daisy-chained in order to input many multiple..

The Multiple is a simple but important module that allows for sending a signal to multiple destinations. Within the Make Noise system the Multiple may also be used for combining clock, gate and pulse signals together to create interesting timing sources (in other words, it acts as a Gate combiner ak..

2hp - MULT is a 2 input, 6 output signal splitter. Channel 1 is normalled to channel 2 when no cable is present, allowing the user to split an input signal six ways, or two input signals with three outputs each.Download the Mult manual hereFirst channel normals to second, providing up to 6 copies of..

Multiply one audio/CV signal into six perfect copies or two signals into two sets of three. Multiply your sequencer out to multiple oscillators and send a third copy to your favorite modulation input.Get BuffTurn one audio or CV signal into six copies, or two signals into two sets of three. This is ..

Buffered Multiple in 1UDual 1 x 4 buffered mult (one audio or cv signal in with multiple buffered outputs).The output of the first mult is normalled to the input of the second mult to create a 1×8 buffered mult.Width:14HPMax Depth:29mmPower: ..