Multiples - Converters

OVERVIEWThe A-180-4 consists of four buffer circuits for control voltages. A buffer serves to avoid a voltage drop. This can occur due to different loads. The lower three units are each normalized to the previous output, so that the module can also be used as a buffered multiple by leaving the lower..

OVERVIEWThe Shakmat SumDif consists of two equal units that can perform sum and difference functions. Each section can be used either as a mixer, as a buffered multiple or as a signal inverter, both for audio and for CV. A very handy module in only 2 HP!DETAILSShakmat's SumDif offers two identical s..

3 Channel Buffered Multiplehttp://wmdevices.com/collections/eurorack-modules/products/buffered-mult30 mA +12V30 mA -12V0 mA 5V25 mm deep..

Buffered MultThe 2hp Buff is a buffered multiple capable of splitting an input signal to multiple outputs. Due to its active architecture, inputs retain their full integrity as they are copied to multiple destinations. One input signal can be copied to six outputs, or two inputs can be copied to thr..

Quantus Pax is a four-channel precision adder, buffered multiple, and polyphonic transposition utility. Each channel has two CV inputs and can be further modified by the three Xpose inputs. QP is made with high quality low-tolerance resistors for unbeatable accuracy. Patch-wide key changes, polyphon..

MTX9 81 Point Pin MatrixThe MTX9 presents a new take on an old classic - the pin matrix, famously incorporated into EMS and Maplin synthesizer designs. The MTX9 provides 9 inputs and 9 outputs to be patched to one another, whilst allowing for passive splitting of one input to several outputs and ave..

The MST ’07 Buffered Multiple is the original buffered mult design invented by George Mattson in 2007. It’s a precision mult that is perfect for 1V/O CV sources. A signal plugged into Input 1 will be available from all 14 outputs. Break the chain by adding a second signal into input 2; sig..

Matrix MixerFeatures:6×6 pin-style matrix mixerSend & return insert capabilitiesTrue summingPassive multiple functionalityCascaded attenuation through channels 3-6Includes 10 pin cablesIncludes 2 insert cables (black = send, gold = return)Description:The Instruō lìon is a 6×6 matrix mixer with a..

All channels support headphones with 16 – 600 Ohm impendancesSuperb sound with low distortion and great low endLinkable channels (B to A and C to A)All inputs with multiples, ie feeding different mixer channelsMono input is normalized to stereoProtected with relais, assuring soft starts and DC prote..

Multicore Signal ConnectorA-180-9 can be used to connect up to 14 audio or control signals between different cases using standard RJ45 network cables. It can be used to pre-patch different cases and connect common signals (e.g. clock, start/stop, master CV) using only one or two RJ45 cables instead ..

1962 Utility Waveform ProcessorFour attenuation channelsTwo bipolar offset channelsFour invertersOne four–channel mixerTwo double–channel mixersMixing of up to eight signals when using inverted inputsTwo modes of minimum/maximum calculationClamp, scan, sample and hold waveform processing modesSamara..