DOEPFER A-100 BUS BOARD 4, INCL. 4 WIRES WITH FLAT CONNECTORS ON BOTH ENDS, LENGTH ABOUT 30CM, COMPATIBLE WITH ROLAND AIRA SERIES (REQUIRES PSU3 POWER SUPPLY)..
USB Power 1UUSB socket for charging/powering peripheral devices.This tiny but handy module connects the USB A connector to the +5V bus on the Intellijel TPS series powered busboards. Allowing 1A or more of current to be supplied to USB devices such as lamps, phone chargers, and usb powered mus..
VOLTS is an additional +5V voltage source for Eurorack power distributions that don´t provide this operational voltage.Maximal output current: 1.5A. Ripple noise: max. 75mATurn your sytem off when installing the Volts. Make sure the -12V markings on the Volts and the buss board match..
DETAILSFlexible bus boards have two advantages: you don't have to glue or screw the power distribution to the housing. And it saves you depth in your cabinet as you can nudge the "flying bus boards" around the modules.Similar to other flying bus boards the Deluxe Flying Cable also features keyed con..
DETAILSFlexible bus boards have two advantages: you don't have to glue or screw the power distribution to the housing. And it saves you depth in your cabinet as you can nudge the "flying bus boards" around the modules.Included are two cables: a longer one with seven and a shorter one with six module..
we are proud to annouce our first official producta fully tested and ready to use powerful power supply that can easy fill up a large amount of modulesits working from 100v to 240v Primary voltage: 100-240V, secondary voltages: +12V, +5V, -12V.maximum power:2 x +12 V: 1.4 A1 x +..
BUS BOARD WITH HIGH QUALITY PARTSPerfect for your Eurorack casewith only high quality pcb and partsone of the best qualities power and distribution boards are the most important thing to have on your eurorack case , if you need extreme power and top quality we design for you this noi..
Use the Molex Power Cable to connect the Super Power or Case Power to the Noise Filtering Power Distribution Board, or to connect two Distribution Boards together.Use the Adapter Cable to connect Synthrotek's power to any other system. It has a male molex connector on ..