-285x169.png "S.F.R.")
Brand: Doepfer
Model: DOEPFER-A-138b
Module A-138 is a four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator, and there's a master attenuator, so that the mixer can be used at the end of the audio chain - ie. it can be used to interface directly with an external m..
54.00€
Ex Tax:45.38€
Brand: Doepfer
Model: DOEPFER-A-138c
Module A-138c is a four channel mixer, that allows to add or to subtract four incoming voltages to the output signal. In the middle position of the corresponding control the amplification is zero. Turning the knob counterclockwise the signal is subtracted from the output sum with increasing amount. ..
70.00€
Ex Tax:58.82€
Brand: Doepfer
Model: DOEPFER-A-138d
Module A-138d can be used in two different ways:as a crossfader module within the A-100as an insert module for external effect units (e.g. guitar stomp boxes) with dry/wet controlIf the module is used as a crossfader within the A-100 the two audio signals are connected to the sockets In 1 ..
72.00€
Ex Tax:60.50€
Brand: Doepfer
Model: DOEPFER-A-138f
Dual Three-Way Crossfader (Slim Line Series)Module A-138f contains two identical crossfaders with three inputs and one output each. Three different signals are connected to the inputs A, B and C. In the ccw position of the corresponding control only signal A appears at the output. Between ccw and ce..
70.00€
Ex Tax:58.82€
Brand: Doepfer
Model: DOEPFER-A-138i
Interrupting MixerModule A-138i is a four channel mixer with an additional mute switch for each input. On top of that it is equipped with two types of single outputs and a dual mix output. All inputs and outputs are DC coupled. Consequently the VCAs can be used to mix both audio and control voltages..
80.00€
Ex Tax:67.23€
Brand: Doepfer
Model: DOEPFER-A-138j
Module A-138j is a four channel mixer with an additional polarity/mute switch for each input. In the upper position of the corresponding switch the inverted signal is used. In the center position the input in question is turned off (mute) and in the lower position the "normal" (i.e. non-inverted) si..
103.99€
Ex Tax:87.39€
Brand: Doepfer
Model: DOEPFER-A-138m
Module A-138m is a 4 x 4 matrix mixer with switches for unipolar/bipolar mode for each column. Unipolar means that the controls work as attenuators. Bipolar means that the controls work as polarizers. In this mode the amplification is zero in the middle position of the corresponding control. T..
135.01€
Ex Tax:113.45€
Brand: Doepfer
Model: DOEPFER- A-138n
Narrow (Mini) MixerModule A-138n is a simple four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator available. The output is twice available (two sockets, hard-wired like a multiple).The module is the slim version of module A-13..
59.00€
Ex Tax:49.58€
Brand: Doepfer
Model: DOEPFER-A-138o
Performance Mixer Output ModuleA-138o is the output module that can be combined with one or more A-138p.level controls for Left, Right and Auxoutput sockets for Left, Right and Aux (3.5 mm mono sockets)A-138o requires at least ine A-138p (no stand-alone use)http://www.doepfer.de/A138p.htm20 mA +12V2..
62.00€
Ex Tax:52.10€
Brand: Doepfer
Model: DOEPFER-A-138-P
Modules A-138p/o are used to built a simple performance mixer (instead of an external stand-alone mixer). Module A-138p is the 4-fold input module, A-138o is the output module that can be combined with one or more A-138p.A-138p features:4 channelscontrols and inputs for each channelinput (3.5 mm mon..
134.01€
Ex Tax:112.61€
Brand: Doepfer
Model: DOEPFER-A-139-2
two-channel headphone amplifiertwo audio inputs with level controlsInput 1 is normalled to Input 2common loudness/master level controlheadphone output (stereo 1/4" jack socket)max. output power ~ 2 W per channel (@ 8 Ohm load)DC coupled inputs and outputs (i.e. also useful for other applications lik..
55.00€
Ex Tax:46.22€
Brand: Doepfer
Model: DOEPFER-A-185-2
module a-185-2 is a precision control voltage adder/buffer. precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of vcos (e.g. from keyboard + sequencer 1 + sequencer 2).the module is equipped with four..
69.00€
Ex Tax:57.98€