Sequencer Modules

       Module A-154 is a supplement to the A-155 Analog/Trigger Sequencer module. It offers a lot of new features that are not available in the basic control unit of the A-155. The A-154 is used to replace the control unit of one or tw..

Analog and Trigger Sequencer, 2 rows of 8 steps with knobs and 2 rows of 8 steps switchesFeatures of the analog rows (knobs):8 potentiometers (knobs)lower row: Scale (knob), voltage output range 0 ... ~ +6,5Vupper row: 1V/2V/4V (octave range switch for exact VCO control), voltage output ranges ..

A-157 is a trigger sequencer subsystem that is used to generate up to eight trigger signals controlled by a 8x16 LED/button matrix (some customers call it "Miniature Schaltwerk" as it is based on the same matrix as the no longer available Schaltwerk). The system is still in the prototype state...

Module A-161 is an eight-step Clock Sequencer which is internally connected to the Clock Divider (A-160). Eight outputs are sequentially switched by the clock signals from the A-160 (see Fig. 1) and can act, for instance, as sequential rhythmic triggers for an envelope. The reset on the A-160 also w..

OVERVIEWIt is a five-step analog sequencers for generating CVs and gates, featuring step addressing via pulses, keypress and a CV. The sequence can be transposed for arpeggio-like effects.Beyond this the module includes two 5-to-1 sequential switch units which, in the same clock like the sequencer m..

DETAILSTop row (CV1) offers selectable gates and slides per step, the bottom row (CV2) only CVs without sildes. Am activated gate in the top row is only high for 1/3 of the stage's length and the CV is played. If the switch is set to "off" the gate stays low and previous stage's CV will be played. I..

TM is a probabilistic random sequence generator based on the research of Alan Turing. His Turing machine was a mathematical model of computation that could, in theory, create any output based on a set of instructions and input variables. In a similar way, the TM chooses random values for steps in a ..

Pressure Points is a controller module, an analog sequencer that is played by hand. Touching the gold plated copper wires (aka Touch Plates), you become part of the circuit, generating a gate signal (Gate OUT), a control signal proportional to the amount of pressure applied (Press OUT) and the 3 Tun..

2hp - SEQ is a 16 step sequencer that is great for controlling oscillators, filters, and anything with a CV input. Portamento, length and playback mode can be adjusted, allowing for versatile, and performable sequences.An eight LED display provides clear feedback for each parameter, keeping the inte..

ShiftyVoice Allocator / Note Hocketing / Analog Shift RegisterThe Shifty is essentially a combination of four sample and hold stages, a sequential gate and sequencer controller. This collection of functions allow for some specific and useful utility application.One of the primary uses for Shifty is ..

The 8S is an 8 step sequencer in 8 HP with control over parameters of the sequence as reset, hold, random step and direction. It’s been designed to work with clock related signals like triggers or gates but any type of CV signals can be used at its inputs. The output signal path is completely a..