Expander

A-149-2 is an extension module for A-149-1. It makes available 8 digital random voltages (i.e. only low/high states like a gate signal). The outputs are controlled by the "Quantized Random Voltages" section of the assigned A-149-1 and correspond to the 8 digital outputs of the shift register th..

4HP DIN/SYNC EXPANDER MODULE FOR MALEKKO SYNCDIN SYNC is an 4 output expander module with selectable divide (1,2,4) for use with Malekko SYNC. Connects to SYNC via 6-pin cable (included).? mA +12V? mA -12V? mA 5V..

1989 Bit Inversion CommanderLipsk is an expander for Xaoc Drezno module that allows to flip (invert) individual bits of the digital signal representation. It features 8 illuminated tact switches for manual control as well as 8 individual gate inputs. When connected to Drezno which is processing a wa..

The ES-6 is the counterpart to the ES-3 Lightpipe/CV Interface, offering up to 8 channels of CV input with output via an optical lightpipe connection. As with the ES-3, the ES-6 also works well for audio signals, with conversion quality on a par with a regular audio interface (see her..

Stereo noise and random CV generatorErica Synths Black Code Source is unique design true stereo digital noise or dual random CV generator, using a complicated calculation of polynomials of various configurations. The module will fit ideally in percussion synthesis or random, self generation patches...

Erica Synths Black Code Source Expander takes the Code Source to next level by adding autobend feature and more noise/CV modes. Autobend provides a useful attack envelope for the internal clock generator’s pitch and some outside CV control. This feature helps to quickly achieve authentic chip-tune p..

MIDI Interface for the TRAX! sequencerThe MIDI BUS was designed to be a MIDI interface for the eurorack system, and more specifically to offer MIDI inputs and outputs for our TRAX performance sequencer.This device provides opto-isolation of the MIDI input and buffers all MIDI signals.The MIDI BUS pr..

1975 Polyphony CommanderHel is a simple, universal expander for polyphonic oscillator modules from Xaoc Devices, such as Odessa.It allows to freely control up to five voices of polyphony via individual Volt/octave inputs.http://xaocdevices.com/main/20 mA +12V0 mA -12V0 mA 5V..

4 output CV expander for ES-5 and ES-4The ESX-4CV is an expansion module for the ES-4 or ES-5, adding four CV outputs from one expansion header.In order to squeeze four 12 bit channels through one 8 bit connection, the channels are time-multiplexed and so effectively run at one-eighth of the au..

DescriptionThe mmMidi is a simple & compact MIDI to CV interface for your Eurorack synthesiser. It translates both MIDI clock and 2 Channels of MIDI note, velocity and gate information to corresponding voltage control signals. The mmMidi is quick to set up and requires minimal configuration.&nbs..

Expansion module for the Sequential Switch v2SEQUENTIAL SWITCH CV EXPANDER is connected to the Sequential Switch via IN/OUT jack switching lugs, which means, if you patch something into IN/OUT jack, the relevant input gets disconnected from the CV Expander. If you use SS with CV Expander connec..