Clock Dividers - Multipliers

Module A152 is a very useful switching and T&H module. It combines a voltage addressed 1-to-8 multiplexer and 8 fold T&H that can be used as kind of an analog shift register too. The active in/output is displayed by a LED. The digital output of the currently addressed step outputs "high". Th..

Module A-160 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, eg., an LFO, MIDI sync, or the gate from a MIDI-CV interface.At the outputs, you have access to the sub-divi..

Module A-160-2 is an enhanced version of the standard clock divider A-160. The module is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Clock input will take any digital signal from, eg., an LFO, MIDI sync, or ..

Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock signal is available at the..

TEMPI is a 6 CHannel, polyphonic time-shifting clock module. It provides an intuitive method for creation and recall of complex clocking arrangements within a modular synthesizer system. Using HUMAN and/ or MACHINE programming you could re-create most classic Clock Divider and Multiplier arrangement..

The SAPÈL is a random control voltages source for eurorack modular systems. It is composed of two main sections, one that generates audio noises, in 4 different versions, and another which includes two specular random clock, random voltages and clock sources. Noise outputs are color coded, based on ..

Λόγοι is a voltage controlled clock divider, counter, and delay...

Φορέω is a triple function processor for triggers, gates and clocks. It simultaneously performs pulse width modulation, multiplication and repetition, with individual input, output and CV for each function.Pulse width modulation, as a ratio of the input signal rate, is adjustable from 0 to 100 perce..

Hand records friction on the front panel using a piezo element. Results are converted into a CV sequence. The voltage curves can be smoothed via a slew potentiometer. A reset input allows you to restart the sequence at any time. At the end of each pattern cycle, a trigger signal is generated.Operati..

Voltage-Controlled Master ClockHorologic Solum is a 4HP master clock with a built in divider. An input jack allows it to be synced to an external clock; when the internal clock is in use, this jack serves as a CV input. HS includes three tempo modes and three divisor modes (divide by powers of ..