Attenuators - Inverters - Offset

1962 Utility Waveform ProcessorFour attenuation channelsTwo bipolar offset channelsFour invertersOne four–channel mixerTwo double–channel mixersMixing of up to eight signals when using inverted inputsTwo modes of minimum/maximum calculationClamp, scan, sample and hold waveform processing modesSamara..

The MIXIV (mix 4) is a four-channel mixer in 4HP, fully built and ready to patch! Channels 1 & 2 can have their own output when a cable is patched in to the sub-output jack. When the left-hand OUT jack is not patched, all channels come out of the right-hand OUT jack. Mix CV or Audio simply and w..

The 7J is a compact joystick controller module. For each axis the joystick can work as an attenuator or attenuverter, selectable via unipolar or bipolar mode switches. The inputs (normalled to +5V) have dedicated attenuators and both X and Y outputs are equipped with continuously variable offset con..

The u3A is a three channel attenuverter useful for scale, add offset, invert or sum signals. As each input is normalled to +5V, with nothing plugged into the jacks, each knob controls a voltage range from -5V to +5V. Each output is also summed to the adjacent channel on the right when no cable is co..

Neutron QAT is a 8HP, 4 channel attenuverter with switchable linear or audio taper potentiometer response. individual,pre and post attenverter mix outputs are available. Red/Green LEDs..

CV-controlled voltage mapper & waveshaperThe Flexshaper is a highly versatile module when it comes to modify evolving voltages in other directions and levels.Five settings allow you to fold/expand/clip/compress/invert partially or completely any CV or audio signal.The module can act as an envelo..

The Instruō [1]f is a crossfader, attenuator, attenuverter and manual DC offset.Whether you want to crossfade between two audio signals, attenuate an envelope, invert a sawtooth LFO for ramped modulation, or use a DC offset to access the Mod parameters of your arbhar, [1]f is the..

4 STEREO CHANNEL PERFORMANCE MIXER WITH SIDECHAIN DUCKING4 stereo channels performance mixerOn-board compressor with external sidechain control voltage option to add proper dynamics to your mixStereo output for speakerphones or headphones with enough current to drive a wide range of headphonesavaila..

Réseaux is known as an R-2R ladder. It has two identical sections which you can cross patch.It is a bidirectional module meaning the inputs can be outputs and vice versa.It has two main uses depending on the direc- tion you are using the module.– When using Réseaux with one input and multi..

Passive Variable Signal AttenuatorThis passive attenuator has a 100K linear potentiometer that is DC coupled. Perfect for adding attenuators to those 1U/3U modules without...

The SISM is a 4-channel voltage manipulator that can scale, invert, attenuate, shift (dc offset), mix, split, and slice your CV and audio signals.A plethora of red and blue LEDs (14) show exactly what each channel and output jack is doing: red = negative voltage, blue = positive.Each channel is inde..

Quad Attenuator (Slim Line Series)Module A-183-5 is a simple passive quad attenuator. Passive means in this context, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts like amplifiers or buffers and no power supply is required.This is how the A-..