Pre Amp

ADDAC219IN was designed to replace bulky 1/4 inch jacks when plugging external stereo gear into the modular realm.Using a 3.5mm TRS stereo jack input, the module splits the TRS stereo signal into 2 mono outputs (Left + Right) while also converting the line input to synth level.There's..

ADDAC219OUT was designed to replace bulky 1/4 inch cables when plugging external stereo gear to the modular realm.It merges 2 TS mono signals (Left + Right) into a TRS stereo output while also converts the synth inputs to line level.There's 3 independent sections a..

ADDAC712 is a dual channel discrete gain staging amplifier, based on a famous discrete preamp board from the 70’s used in some legendary equipment.What caught our attention was the character of its clipping and resulting saturation/distortion.The module can be used with modular signals to add a dist..

The BXx2 is a dual channel preamp, EQ and mixer based on the classic Boss BX series mixers. Well loved for their unique character and musicality, the sound of the BX is found throughout countless techno records from the 80s & 90s.With the inclusion of both input gain and level controls, each cha..

ST Amp is a 1U stereo amplifier designed to boost your external signals into modular levels. The module is designed under the Intellijel 1U format and uses the same pinout, making it fully compatible with the Intelljel case’s rear connectors.FEATURESStereo amplifier and signal booster.Three selectab..

Inamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks. Both inputs are summed so you can use them at the same time as an input mixer.The unit is designed to amplify up to x20 the input signal, allowing to amplify most of the music machines out there (Domestic line le..

Instrument Interface is an eurorack pre-amp capable to bring any type of audio signal to modular levels thanks to its amplification circuit.The module can drive regular and condenser microphones (+48V Phantom Powered) as well as Instrument and Line signals with a very low distortion ratio.Instrument..

Electric Guitar InterfaceInjectr is a fully-equipped electric guitar and bass interface for eurorack synthesizers. The module features an overdrive-capable preamp, versatile amp simulator, and control voltage extractors designed to inject stringed instrument signals directly into the modular environ..

Module A-119 (External Input / Envelope Follower) is designed to allow external audio signals to be integrated into the System A-100. It comprises a pre-amp, envelope follower, and comparator.The pre-amp has two inputs: an unbalanced input for line level signals, with a gain factor of from 0 to 20, ..

The Erica Black Output Module is a high quality output mixer and stereo panner with balanced outputs and headphone amplifier for monitoring your modular masterpieces.All inputs are buffered, we use stereo potentiometers (found in high quality studio mixers) for panning, IN4 is stereo input with simu..

Little Mikey is a mic/instrument pre-amp in an 8HP Eurorack module, providing up to 60dB of exceptionally clean gain.It will provide 48V phantom power to condenser microphones and other phantom-powered equipment, and has a high impedance input option allowing direct connection of e.g. electric guita..