LFO

EG is a full featured two-stage envelope generator. In addition to a colossal range from 3ms to 11 minutes per stage, EG features the ability to switch between linear and exponential curves on the fly, a built-in attenuator, and CV over attack and decay. Boasting more features than modules five time..

LFOLFO is a voltage controlled low frequency oscillator. 8 waveforms are available with smooth morphing between each, allowing for complex and unique patterns. In addition to sine, triangle, sawtooth, and square waveforms on the primary output, four alternate wavef..

VCO is an analog voltage controlled oscillator based on the reissue of the legendary Curtis CEM3340 IC.Many believe this chip to be the greatest sounding analog oscillator of all time. VCO features simultaneous triangle, sawtooth, and square wave outputs with linear FM, hard sync, and PWM capabiliti..

The ‘Pip Slope’ (rev II) is a compact envelope and function generator. It supports both Attack/Decay and Attack/Sustain/Decay type envelopes with both direct and voltage control of Attack and Decay times. Envelope shapes can be morphed between exponential, linear and logarithmic type slopes. Envelop..

We are pleased to present our complex Low Frequency Oscillator (cLFO)Modulate your modulation they said! The cLFO is all about that.The cLFO contains two CV-controlled LFOs that are intermodulating and are combined into a ring modulator.The module has been specifically ..

Rampage is Befaco’s approach to an old invention: the Serge/Buchla ramp generator.We took the idea of a “patch programmable” function generator/processor, put two units in the same module and expanded them with new functions and ways to combine them: Slope detectors, analog logic functions, and evol..

Gliss is a 4 HP Eurorack module using a recordable touch sensor to introduce gestural control into modular systems. Gliss simultaneously produces two high-resolution signals: one following your finger’s position, the other following touch size. These signals are available via two CV outputs, of..

The Chipz module is a dual voltage-controlled oscillator / low-frequency oscillator module. The voltage-controlled oscillators are derived from classic lo-fi sounding wave shapes, designed to be full of character. Cre8Audio’s product description says “we started with the idea” that Chipz would be a ..

Width = 16hpDepth = 30mmPower draw130mA when running +12V rail70mA when running -12V----ADSR / Envelope facts----Fully analog Pittsburgh Modular Synthesizers developed 4 stage ADSR circuit with independent Attack, Decay, Sustain and Release controls.Voltage output range 0V - 10V“Long” button doubles..

Start building your own Eurorack system. The Cre8audio NiftyBUNDLE, Case, Cellz, Chipz and Cables includes everything you need to create your own Eurorack system.The Cre8audio NiftyCASE Powered Eurorack Case with MIDI to CV is a compact yet robust case designed for housing a wide range of Eurorack m..

The Dual LFO Module from Tobinski combines two low-frequency oscillators, each based on Electric Druid technology: the TapLFO3C and the LFO10. This module provides a wealth of modulation possibilities, with flexible synchronization, waveform shaping, and dynamic CV control to suit any Eurorack setup..