Midi To CV - CV To Midi Interface

MIDI is a plug and play solution for interfacing with your computer or MIDI hardware. Four modes provide monophonic, duophonic, dual mono, and quad trigger operation.MIDI clock, CC messages, and note on messages are all easily accessible between the four modes. The status LED provides clear indicati..

DescriptionThe mmMidi is a simple & compact MIDI to CV interface for your Eurorack synthesiser. It translates both MIDI clock and 2 Channels of MIDI note, velocity and gate information to corresponding voltage control signals. The mmMidi is quick to set up and requires minimal configuration.&nbs..

Cv thing is a fully mappable CV to MIDI converter in just 6HP. Its based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. Ccs, Program change,v/oct to Note..

The DROID master is the central module in your DROID setup. In any Droid setup you need one master module. You can use it stand alone or with up to 16 controllers and up to one G8 and one X7 expander attached. Currently there are six different controllers available: B32,&nbs..

This set contains one master and one G8 expander. The G8 is very useful if you want to create more complex DROID patches since its additional eight gate inputs/outputs save valuable CV jacks in your master.Current Draw: 195 mA +12V | 15 mA -12V | 0&n..

DROID MASTER18 - Compact Universal CV Processor with MIDI/USBThe MASTER18 is a very flexible generic CV processor.You can think of the MASTER18 as a smaller and cheaper version of the DROID MASTER without CV inputs and LEDs, but with an integrated USB and MIDI, six additional gate jacks, t..

Welcome to the DROID X7 expander. The X7 gives you USB and MIDI connectivity for your master and also four gate outputs with modular levels.You can process incoming and generate outgoing MIDI streams, both via classical DIN cables and via USB. Both the in and the out direction su..

Module A-190-3 is a Midi/USB-to-CV/Gate interface that allows the integration of the A-100 system into a USB or Midi environment. It has available 4 analog control voltage outputs (CV1...4) and one Gate output. A-190-3 is the modular version of Dark Link.In/Outputs and controls:USBMidi Inp..

A-190-4 is the replacement for module A-190-1 which is no longer avaiulable. The functions of A-190-1 and A-190-4 are nearly the same (Midi In, Midi Out, CV1, CV2, Gate, Clock, Reset). But the operation of the A-190-4 has been improved because a 3-digit LED display is available. The c..

Module A-190-8 is a Midi/USB to Sync interface. The main application of the module is the control of clocked A-100 modules like sequencers (A-155),  sequencer controllers (A-154), trigger divider (A-160 or A-163), trigger sequencer (A-161) and similar units. It may be used also to res..