IO Instruments Kalyke

Dual Function Generator

• LFO section
  Waveform: controlled/morphed manually via potentiometer or CV
  Morphs from Pulse (20-50-90%) -> Sinus (720°) -> Ramp (720°) -> Triangle (680°)

  Tempo: controlled via potentiometer or CV
  Center of potentiometer at: 4Hz +/- 8 Oktaves

  Repeats: controlled via potentiometer and reset in
  Can be adjusted from 1-14 repeats and endless loop (takes effect after reset in)

  ADSR-Mix: ADSR can be mixed onto LFO with potentiometer
  Sample and Hold: LFO can be switched into S&H mode
  Offset: can be toggled btw -5V to +5V and 0 to +10V via switch
  Input: 1xCV for waveform, 1xCV for tempo, 1xReset
  Output: LFO has one positive and one negative CV output

  Manual Trigger: one button to reset LFO (shared with ADSR)

• ADSR section
  Curve: continuous exponentiell to linear response, controlled via potentiometer
  Ratchets: 16 different multi repeats of attacks, controlled via Attack and Decay sliders
  Loop: loop mode from Attack to Release, controlled via switch
  Freeze: all settings get freezes to keep exact positions
  Control: 4x30mm faders to control A, D, S and R segments
  Manual Trigger: one button to reset ADSR (shared with LFO)
  Output: ADSR has one positive and one negative CV output, further one trigger out at end of attack,
  one trigger out at end of decay
  Input: 1xGate in (>1V), four modulation inputs to control A, D, S, and R segments (0-5V)

  
  

General:
Output Amplitude: 10VPP (LFO) / 7,5V (ADSR)
Frequency Range: LFO 0,016Hz (60s) - 284Hz / ADSR 0,4ms-10s (Attack); 0,8ms-20s (Decay/Release)
Trigger out: 2ms/10V