Search

Ring Modulation is a classic synthesis technique that takes two source waveforms and generates a third waveform, which contains the sum and difference frequencies of the two inputs.At audio rates, ring modulation creates a fairly inharmonic and ‘metallic’ sound. At LFO rates, ring modulation can gen..

Passive Variable Signal AttenuatorThis passive attenuator has a 100K linear potentiometer that is DC coupled. Perfect for adding attenuators to those 1U/3U modules without...

Running Order is a two track trigger sequencer. It can be a precise master clock or manipulate incoming clock signal and works great in use as a sub-sequencer/divider in your Eurorack environment.Zero-jitter clock generation: less than 50 microseconds internal clock jitter101 style 1/16th note input..

Out is a 1U stereo output module designed to convert audio signals from your modular to line-levels. The module is designed to be used on cases with onboard Jack connectors or Intellijel 7U and Palette series, as it uses the same pinout. The module also includes a high-quality Headphone amplifier wi..

ST Amp is a 1U stereo amplifier designed to boost your external signals into modular levels. The module is designed under the Intellijel 1U format and uses the same pinout, making it fully compatible with the Intelljel case’s rear connectors.FEATURESStereo amplifier and signal booster.Three selectab..

STMix is a four-channel stereo mixer in 28hp and 1U format. It can work independently or as an expansion of our Hexmix module via the six-pin connector located in the back. The module is designed under the Intellijel 1U format.FEATURESFour channels stereo inputs with volume control.AC Coupled inputs..

CV AND AUDIO UTILITY / REALTIME VISUALIZERMotion MTR allow you to mix, attenuate and invert signals while having clear visual feedback of their levels.Each channel can function as:Audio level control with VU meterCV attenuator with voltage meterCV inverter with voltage meterEach input is normalled t..

Xfade 1U is a classic DJ-style stereo crossfader, with a few extra tricks up its sleeve. The  ‘A’ and ‘B’ sides both have L+R inputs. The crossfader blends two stereo input signals together — crossfading one into the other depending on the position of the slider an..

Mighty oscillations, mini size.An analog oscillator and LFO with pure waveforms and precise tracking in a compact package.  Perfect as a utility modulation source but equally capable to be used as a primary sound source. Patch it up and let it rip!FeaturesFour simultaneous pure waveforms: ..

Bring that USB connector to the front!Originally designed for the Metropolix 1.4 USB MIDI update, the USB Extender extends the USB Micro connector on the back of a module, bringing it to the front panel for easy connection to your USB Host.USB Extender comes with both 1U and 3U panels*1UThe 3U panel..

5 Logic BlocksLB5 gives you simultaneous access to inverters, 2-inputs logic gates and their complementary outputs, as well as a flip-flop, which is the only block to make use of the Reset input.Our hybrid 1U front panels use the dimensions as defined by Intellijel, and the open slots make these com..

Analog ComputationsAC3 performs simple computations of 2 analog signals and generate 6 new ones, based on inversion, addition, average and subtraction.This module could also perform some simple tricks when using only one input, and act as a dual output buffer, or as a voltage doubler.Uses should be ..