Menu
Your Cart

New Products

Brand: Doepfer Model: DOEPFER-A-183-1
Module A-183-1 is a simple passive dual attenuator. Passive means, that each unit is made of two sockets and a 50k linear potentiometer only. There are no active parts like amplifiers or buffers and no power supply is required.  This is how the A-183-1 works: At the output socket appears t..
40.00€
Ex Tax:33.61€
Brand: Doepfer Model: DOEPFER-A-182-1
Module A-182-1 is a simple passive multi-connector similar to the multiples modules A-180-1/A-180-2. In contrast to modules A-180-1/2 each socket is equipped with a 3-position switch that allows to connect the corresponding socket to the internal bus #1 (left position), bus #2 (right position) ..
52.00€
Ex Tax:43.70€
Brand: Doepfer Model: DOEPFER-A-181
Two multiples with one 1/4 jack socket and two 3.5mm jack sockets each, upper multiple is wired monophonic, lower is wired stereophonic.For more detailed information please look at the English user's guide: A181_man.pdfBreite/Width: 4 TE / 4 HP / 20.0 mmTiefe/Depth: 30 mm (gemessen ab der Rücks..
45.01€
Ex Tax:37.82€
Doepfer A-180-3 Buffered Multiples Doepfer A-180-3 Buffered Multiples
Pre-Order
Brand: Doepfer Model: DOEPFER-A-180-3
Module A-180-3 is a dual buffered 1-in-3 multiple. The signal applied to the input socket appears as a buffered signal at the three output sockets. Each output has it's own buffer, i.e. the three output sockets are not simply connected to each other. The lower output of the upper unit is normalled i..
49.00€
Ex Tax:41.18€
Brand: Doepfer Model: DOEPFER-A-180-2
Modules A-180-1 and A-180-2 are simple multi-connectors. They have eight inter-connected sockets, so that you can "multiply" any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Thoug..
35.00€
Ex Tax:29.41€
Brand: Doepfer Model: DOEPFER-A-178
Theremin module for generating a variable control voltage by approaching/removing hand to/from an antenna. The distance range is about 30 cm. Additionally the module is equipped with a Gate output with adjustable threshold level. Controls/Inputs/Outputs: antenna input, offset (knob for zero adjust),..
110.00€
Ex Tax:92.44€
Brand: Doepfer Model: DOEPFER-A-177-2
Economically priced module for connecting one foot controller and one double foot switch for control A-100 functions by means of the feet. For example the frequency of a filter or the loudness can be controlled by a foot controller, but even other parameters like LFO frequency, modulation depth, pha..
55.00€
Ex Tax:46.22€
Brand: Doepfer Model: DOEPFER-A-174-2
A-174-2 is a modulation wheel module with two wheels. The factory setting is a spring loaded wheel at the left side with bipolar voltage output (i.e. 0V in center position, positive voltage in the upper range, negative voltage in the lower range, voltage range about -5.5 V ... 0V ... +5.5 V) and a w..
80.00€
Ex Tax:67.23€
Brand: Doepfer Model: DOEPFER-A-171-2
Module A-171-2 is a voltage controlled slew limiter with a lot of additional features beyond a simple slew limiter. It's mostly a licensed copy of Ken Stones VCS which is in turn based on the Serge VCS.These are the most important features:Manual control of the Slew-Up timeCV control of th..
124.00€
Ex Tax:104.20€
Brand: Doepfer Model: DOEPFER-A-170
Module A-170 contains two separate slew limiters, also known as portamento controllers or integrators. The first SL has just one joint control, which sets both rise and fall times (c. 0 ...10 sec). The second SL has separate controls for rise and fall times, and can therefore be used as a simple AR ..
64.00€
Ex Tax:53.78€
Brand: Doepfer Model: DOEPFER-A-168-1
Module A-168-1 is a pulsewidth modulation generator (PWM Module). It derives a rectangle signal with adjustable pulsewidth from an external triangle, sawtooth or sine wave. The external signal can be an LFO, VCO or any other signal with falling/rising slopes (e.g. ADSR). In addition the pulsewi..
50.00€
Ex Tax:42.02€
Brand: Doepfer Model: DOEPFER-A-166
Dual logic module with 3 inputs for each unit. The logical states of the inputs ("1" = high / "0" = low) are linked together in 3 ways: AND, OR, EXOR (exclusive OR). The three functions are available simultaneously at three outputs with LED display of the output states. Additionally two inverters ar..
115.00€
Ex Tax:96.64€
Showing 3397 to 3408 of 3508 (293 Pages)