Doepfer

Miniature Synth VoiceModule A-111-6 is a complete miniature monophonic synthesizer module that has these features available:VCOTune: manual tune control (with an internal jumper the range can be set to ~ +/-1 half an octave or ~ +/-2.5 octaves)Oct.: range switch -1 / 0 / +1 octaveMod.: modulation de..

The A-100LC1 is very similar to the A-100LC3 but offers only 48 HP for installation of modules. A-100LC3 is equipped with the power supply A-100SSB.The case is made of raw wood without laquering. The case can be varnished by the customer in any desired color e.g. by means of a spray can.It is also a..

Octal Linear VCA / Voltage Controlled MixersModule A-130-8 contains eight linear voltage controlled amplifiers (VCAs). Each VCA features a control voltage input (CV), a signal input (In) and a signal output (Out). In addition three mixers are included: the socket labelled "1-4" outputs the sum of th..

Dual Voltage Controlled VCA/Polarizer/Inverter/Ring ModulatorA-133-2 is the slim version of the A-133 but has some additional features and improvements available compared to the A-133.Module A-133-2 can be used for a lot of applications: as a simple VCA, or a voltage controlled polarizer/attuverter,..

Voltage Controlled Stereo MixerA-135-3 is a is a voltage controlled stereo mixer with four inputs. Behind a front panel with 8 HP only eight linear VCAs (voltage controlled amplifiers) and the mixer based on the VCAs are available.Controls, Inputs and Functions of each input:Level (manual control of..

Quad Level ShifterModule A-183-4 is a fourfold level shifter. A level shifter is required if the level of a digital control signal has to be increased or decreased. A typical application is the conversion of a gate, trigger or clock signal with +5V voltage level (tolerance range +2...+5V) to +1..

Joy Stick IIModule A-174-4 modules outputs three control voltages generated by a spring-loaded X/Y cross potentiometer (so-called joy stick) and a Gate signal. The control voltages for X and Y are controlled by the X and Y position of the joystick in the usual way. The third control voltage Z is con..

Multicore Signal ConnectorA-180-9 can be used to connect up to 14 audio or control signals between different cases using standard RJ45 network cables. It can be used to pre-patch different cases and connect common signals (e.g. clock, start/stop, master CV) using only one or two RJ45 cables instead ..

Dual Three-Way Crossfader (Slim Line Series)Module A-138f contains two identical crossfaders with three inputs and one output each. Three different signals are connected to the inputs A, B and C. In the ccw position of the corresponding control only signal A appears at the output. Between ccw and ce..

Light Controlled Voltage Source II (Slim Line Series)Module A-179-2 can be used to convert different illumination intensities into corresponding analog voltages and a gate signal derived from the analog voltage. It's the successor of the obsolete module A-179.A light sensitive resistor (LDR) convert..

Dual Rotary Switches (Slim Line Series)Module A-182-4 is a simple passive module that contains two mechanical rotary switches with 4 positions each. According to the position of the control knob socket 1, 2, 3 or 4 is connected to the common socket C.As the module is fully passive it works bidirecti..