Menu
Your Cart

Transient Modules

Brand: Transient Modules Model: TM-1F
The 1F is a voltage controlled switch, intended to be ‘one friend’ for your sequencer. Its design has been specially focused on working with sequences, by giving them some randomness, applying transpositions or constant variation over time. For this, 0.1% tolerance resistors have been used to achiev..
89.00€
Ex Tax:74.79€
Brand: Transient Modules Model: TM-2M
2M are two unity gain mixers in parallel. Each mixer has level controls for the 3 inputs and also for the output. As its design has been specially focused on audio applications, all the input potentiometers are audio-taper type while the output ones are linear. Low distortion / h..
121.38€
Ex Tax:102.00€
Transient Modules 4R
Pre-Order
Brand: Transient Modules Model: TM-4R
Quad random stepped voltage generatorThe 4R is a quad random voltage generator in 2HP. It generates two different random stepped voltages per input, each time a rising edge is sensed at TRIG1 or TRIG2. The inputs are independent so they can work at different clock speeds. As TRIG2 is normalled to TR..
95.00€
Ex Tax:79.83€
Transient Modules 7J
Pre-Order
Brand: Transient Modules Model: TM-8S
The 7J is a compact joystick controller module. For each axis the joystick can work as an attenuator or attenuverter, selectable via unipolar or bipolar mode switches. The inputs (normalled to +5V) have dedicated attenuators and both X and Y outputs are equipped with continuously variable offset con..
159.00€
Ex Tax:133.61€
Transient Modules 8S Sequencer
Pre-Order
Brand: Transient Modules Model: 11115
The 8S is an 8 step sequencer in 8 HP with control over parameters of the sequence as reset, hold, random step and direction. It’s been designed to work with clock related signals like triggers or gates but any type of CV signals can be used at its inputs. The output signal path is completely a..
125.83€
Ex Tax:105.74€
Brand: Transient Modules Model: TM-U1P
The u1P is a Bernoulli gate. Based on the probability set by the potentiometer, it randomly routes a trigger or gate signal sensed at the input to either of its two outputs. Having three different operating modes (direct, toggle, single), it becomes a useful tool for adding spice and variety to your..
95.00€
Ex Tax:79.83€
Transient Modules u2X
Pre-Order
Brand: Transient Modules Model: TM-U2X
The u2X is a dual buffered multiple with bicolor leds for monitoring signals. Each input is copied into three outputs. As the top section is normalled to the bottom section it’s also possible to get 6 copies of the same signal.Technical specifications:• 12HP, Intellijel 1U size.• 20 mm dep..
45.00€
Ex Tax:37.82€
Brand: Transient Modules Model: TM-U3A
The u3A is a three channel attenuverter useful for scale, add offset, invert or sum signals. As each input is normalled to +5V, with nothing plugged into the jacks, each knob controls a voltage range from -5V to +5V. Each output is also summed to the adjacent channel on the right when no cable is co..
75.00€
Ex Tax:63.03€
Transient Modules u4R
Free Pre-Order
Brand: Transient Modules Model: TM-U4R
The u4R is a 1U adaptation of the 3U module 4R. It generates two different random stepped voltages per input, each time a rising edge is sensed at TRIG1 or TRIG2. The inputs are independent so they can work at different clock speeds. As TRIG2 is normalled to TRIG1 it is also possible to get 4 r..
0.00€
Ex Tax:0.00€
Showing 1 to 9 of 9 (1 Pages)