Search

Module A-150 (Dual VCS) contains two separate voltage-controlled switches.Each switch has a control voltage input, a common Out / Input, and two In / Outputs. The switches are bi-directional: they can work in both directions, so can connect one input to either of two outputs, or either of two inputs..

Length: 20” (50cm)5.5/2.1mm center negative angled DC plugBarrel: 10mmColor: Black..

CIOKS 1050-LN FLEX CABLECIOKS’s 1050-LN Flex cable is a 5.5/2.1mm center negative angled 12mm barrel DC plug cable with a length of 50cm.1050-LN FLEX CABLE FEATURES20” cableRight angled plug”BOSS standard"12mm barrelLength: 20” (50cm)5.5/2.1mm center negative angled DC plugBarrel: 12mmColor: Black..

2050         CIOKS Flex 2 – 50cm (20″) with 5,5/2,1mm centre positive angled DC plug (red)ype 2 Flex cables are red and fitted with a centre positive 5,5/2,1mm DC plug. This standard is less popular but also widely used in older or positive ground pedals as for example the ’..

The Cioks C4 link cable is used for connecting a Cioks 4 Expander unit to a Cioks DC7 power supply.HighlightsEIAJ to 5.5x2.1mm DC plug, center positiveUsed for connecting a Cioks 4 Expander Unit to a Cioks DC7 power supplyPlug direction: straight-straightDimensionsLenght: 50 cm...

4050    CIOKS Flex 4 – 50cm (20″) with 5,5/2,5mm centre positive angled DC plug (green)Type 4 Flex cables are green and fitted with a centre positive 5,5/2,5mm DC plug. This Flex cable type is nowdays mainly used to power all Eventide Factor and H9 pedals and is widely used for many A..

5015      CIOKS Flex 5 – 15cm (6″) with tip positive angled 3,5mm jack plug (black)Type 5 Flex cables are black and fitted with a tip positive 3,5mm jack plug also called mini jack. This Flex cable standard is quite common mainly in older pedals like those from Electro-Harmonix or DOD..

5050      CIOKS Flex 5 – 50cm (20″) with tip positive angled 3,5mm jack plug (black)Type 5 Flex cables are black and fitted with a tip positive 3,5mm jack plug also called mini jack. This Flex cable standard is quite common mainly in older pedals like those from Electro-Harmonix or DO..

6050    CIOKS Flex 6 – 50cm (20″) with 9V battery snap (black)Type 6 Flex cables are black and fitted with a 9V battery snap or clip if you like. This Flex cable should be used with 9V battery powered pedals which don’t have an adapter input socket e.g. vintage Wah pedals or some MXR ..

7050    CIOKS Flex 7 – 50cm with 2 pin DIN plug (blue)Type 7 Flex cable is blue and fitted with a straight 2 pin DIN plug. This plug type was widely used in older loudspeakers but the only pedals we know which use this standard are eight older vacuum tube pedals from Electro-Harm..

The Cioks DC link cable is used for connecting a Cioks 8 Expander unit to a Cioks DC7 power supply.Lenght:50cm..