Search

Doepfer A-160-2 Clock/Trigger Divider II

Brand: Doepfer Model: DOEPFER-A-160-2

Module A-160-2 is an enhanced version of the standard clock divider A-160. The module is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Clock input will take any digital signal from, eg., an LFO, MIDI sync, or ..

99.00€

Ex Tax:83.19€

CLOCK DIVIDERS MULTIPLIERS

Doepfer A-160-5 Voltage Controlled Clock Multiplier / Ratcheting Controller

Brand: Doepfer Model: DOEPFER-A-160-5

Module A-160-5 is a voltage controlled clock multiplier. The incoming clock signal (socket Clock In) is multiplied by a factor that depends upon the control voltage on socket CV In (0...+5V) and the position of the Mode switch. The multiplied clock signal is available at the..

105.01€

Ex Tax:88.24€

CLOCK DIVIDERS MULTIPLIERS

Sequential Prophet REV2-16

Brand: Sequential Model: REV216

A Modern Classic ReinventedThe Prophet Rev2 is Dave Smith’s reimagining of his Prophet ’08 poly synth — a modern classic that has appeared on countless recordings and stages since its debut in 2007. As Dave puts it, “The Prophet Rev2 is the realization of our effort to enhance and improve every..

2,898.99€

Ex Tax:2,436.13€

ANALOG SYNTHESIZERS

Sequential Prophet REV2-16 Desktop

Brand: Sequential Model: REV216Desktop

A Modern Classic ReinventedThe Prophet Rev2 desktop module is just as powerful and easy to use as its counterpart, the Prophet Rev2 keyboard. The module has the same controls with the same the same ease of use as the keyboard version. Best of all, it sounds just as awes..

2,499.00€

Ex Tax:2,100.00€

ANALOG SYNTHESIZERS

Pre-Order

Brand: AtoVproject Model: ATOV-PROJECT-16N-REWORK

AtoVproject 16n Rework

The 16n AtoVproject Rework is aimed at solving a problem very specific to modular synthesis. As a patch is getting more and more complex a forest of cables has grown over your system before you know it. This module allows you to take the control from the modular into a very ergonomic controller that..

358.00€

Ex Tax:300.84€

CONTROLLERS - CV RECORDERS

Brand: Cioks Model: CIOKS-DC-LINK-L24160

Cioks DC Link L24160

The Cioks DC link cable is used for connecting a Cioks 8 Expander unit to a Cioks DC7 power supply.Lenght:160cm..

11.00€

Ex Tax:9.24€

POWER SUPPLIES

4ms Multi Power Cable 16 pin

Brand: 4ms Model: 4MS-MULTI-POWER-16PIN

16-conductor ribbon cable with four 16-pin connectors (20" total length)For connecting more than 2 modules in a Pod. Compatible with all sizes of 4ms Pods.Warning: make sure the total power draw for all connected modules does not exceed Pod power supply's maximum power. See Pod manual for details..

8.00€

Ex Tax:6.72€