FIL3 Spectral DevastatorThe FIL3 from Future Sound Systems is a revised form of the sought-after FIL2 Spectral Devastator - a high-pass and low-pass filter coupling, both with unmistakeable character. Originally designed between 2011 and 2012, the Spectral Devastator was designed by Finlay Shakespea..
FSS / Mute MAKROWYour system's steering wheel.MAKROW is a patch macro-controller, giving 6 attenuvertable outputs from a single bias voltage, controllable from the large dial at the top of the panel. This dial can be switched from spanning 0V to +10V (unipolar) to spanning -10V to +10V (bipolar). De..
MTX9 81 Point Pin MatrixThe MTX9 presents a new take on an old classic - the pin matrix, famously incorporated into EMS and Maplin synthesizer designs. The MTX9 provides 9 inputs and 9 outputs to be patched to one another, whilst allowing for passive splitting of one input to several outputs and ave..
MX1 MixerThe MX1 mixer module from FSS is designed to present a compact, affordable mixing solution for Eurorack users. The MX1 gives four audio inputs in as many HP, with both normal and phase-inverted outputs available. The level controls of the MX1 are logarithmic, but the channels are DC coupled..
OSC1 Cyclical EngineThe OSC1 from Future Sound Systems presents a voltage-controlled analogue oscillator with a few features unexpected of a basic oscillator, with a particular focus on covering all bases of signal modulation. Once triangle, sinusoidal and pulse waveforms are derived from its sawtoo..
Triple VCO focusing on wave-splicing synthesis techniquesThe Recombination Engine is a triple analogue voltage-controlled oscillator Eurorack module with a focus on a novel wave-splicing technique. The Recombination method can produce new, harmonically-rich timbres. Each oscillator is built around a..
FSS / Mute STUMMTake it away...STUMM is a six-channel bank of high-fidelity audio mutes with grouping functionality. Each individual mute switch offers toggled (switch up) and momentary (switch down) click-less muting, and is also assignable to belong to group A, B or neither group. Signal is passed..
The core of the oscillator is based around a shape-variable ramp generator, with similar functionality to that found in the Korg MS Modulation Generators. Here, the Shape control takes the Ramp output from a descending sawtooth, through triangle, to an ascending sawtooth shape. This varying ramp wav..
TG3 Gristleizer FilterThe Gristleizer Filter presents one of the key components of the Gristleizer in a Eurorack module - its JFET-controlled multi-feedback band-pass filter. Its characteristics are not unlike a wah-wah pedal, whilst also being able to create other vocal tonalities, especially with ..
TG4 Gristleizer ModulatorThe Gristleizer Modulator presents another key component of the Gristleizer in a Eurorack module - its JFET-controlled voltage-controlled amplifier. Whilst originally controlled by the Gristleizer's oscillator to achieve tremolo (or amplitude modulation) effects, the TG4 can..
TG5 Gristleizer Pre-AmplifierThe Gristleizer Pre-Amplifier is a new addition to the existing circuity of Roy Gwinn's "Guitar Effects Pedal" design. After Chris Carter's suggestion of a guitar pre-amplifier for use with the rest of the Gristleizer series, the TG5 came into being. Based upon Jonn..