Menu
Your Cart

Cioks DC10 Link

Cioks DC10 Link is a state of the art professional power supply for effect pedals. It delivers 2.800mA of the cleanest power from its 10 isolated outlets with 9 and 12V available.

Besides being one of the most powerful power supplies for effect pedals on the market it also offers some new advanced features. The adjustable outlet 10 will power pedals with non standard voltages like e.g. Tonebones at 15V, Blackstar dirt pedals at 22V, GLAB GSC-4 controller at 24V, all high current 18V pedals from Hiwatt, a few vintage EHX and many others.

Due to its very high 800mA current capability at 9 or 12V you can with this single outlet power one of the big units like Line 6 M9 or M13, VOX ToneLab or some older BOSS GT-XX Processors just to mention a few.

The mA-meter allows you to measure all your pedals’ current draw so you can use the correct outlet for each unit without “wasting” power by connecting say a 160mA pedal to a 400mA outlet instead of using a 200mA outlet. Also if you like to power three pedals using our 3-way daisy chain you can check their total mA figure and match them to an outlet with sufficient power.

Should you need more outlets, even more power or some AC you can ad another CIOKS link Power Supply to it. With the new DC10 link you get the best of the best from CIOKS.


What’s in the box?

  • CIOKS DC10 link power supply
  • Mains power cord
  • 17 Flex cables:
    Type 1 – black with 5,5/2,1mm centre negative DC plug x8
    Type 2 – red with 5,5/2,1mm centre positive DC plug x1
    Type 4 – green with 5,5/2,5mm centre positive DC plug x2
    Type 5 – black with 3,5mm tip positive Jack plug x1
    Type 6 – black with 9V battery clip x1
    Split Flex type 1 – black, powers two pedals of a single outlet x1
    3-way Daisy chain Flex type 1 – black, powers three pedals of a single outlet x1
    Parallel adapter Flex – sand grey, adds currents of two outlets x1
    Series adapter Flex – white, adds voltages of two outlets x1
  • Pedalboard mounting hardware: screws, washers, stand-offs and a hex key
  • Manual
  • Product sheet (drill template)
  • Flex guide
Tags: Cioks , DC , 10 , Link