A-190-4 is the replacement for module A-190-1 which is no longer avaiulable. The functions of A-190-1 and A-190-4 are nearly the same (Midi In, Midi Out, CV1, CV2, Gate, Clock, Reset). But the operation of the A-190-4 has been improved because a 3-digit LED display is available. The c..
Module A-190-5 is a four voice Midi/USB to CV/Gate interface. For each voice a pitch control voltage (CV1, 1V/octave standard to control VCOs), a gate output (to control envelope generators) and two additional control voltages (CV2, CV3) are available. The two additional CV outputs can be controlled..
Module A-190-8 is a Midi/USB to Sync interface. The main application of the module is the control of clocked A-100 modules like sequencers (A-155), sequencer controllers (A-154), trigger divider (A-160 or A-163), trigger sequencer (A-161) and similar units. It may be used also to res..
Module A-192-2 contains two independent CV/Gate-to-Midi/USB interfaces. For each of the two sub-units these inputs are available: Gate Input (min. +5V)CVN Input (defines the Midi note number), 1V/octave standard, range 0...+10V (i.e. 10 octaves)CVV Input (defines the velocity value assigned to ..
Doepfer’s A-196 Phase Locked Loop module consist of three sections. The first is a VCO with a three position switch for selecting the tracking range. The second is a Phase Comparator with a three position switch between different comparator types that leads to distinctly different timbral characteri..
Manual measures: about 600 x 30 x 18 mm (without covering cap) / about 600 x 30 x 30 mm (with covering cap at the right end)Weight of the manual: about 1kg Power consumption: 40mA at +12V and 20mA at -12VDepth: 40mm8HP..
Module A-199 is a spring reverb module.The reverb effect is electronically simulated by means of three spiral springs.Spring reverb systems have a very characteristic sound that is based on the (insufficient) mechanical properties of the springs like signal delays, audio resonances, limited frequenc..