Interrupting MixerModule A-138i is a four channel mixer with an additional mute switch for each input. On top of that it is equipped with two types of single outputs and a dual mix output. All inputs and outputs are DC coupled. Consequently the VCAs can be used to mix both audio and control voltages..
Module A-138j is a four channel mixer with an additional polarity/mute switch for each input. In the upper position of the corresponding switch the inverted signal is used. In the center position the input in question is turned off (mute) and in the lower position the "normal" (i.e. non-inverted) si..
Module A-138m is a 4 x 4 matrix mixer with switches for unipolar/bipolar mode for each column. Unipolar means that the controls work as attenuators. Bipolar means that the controls work as polarizers. In this mode the amplification is zero in the middle position of the corresponding control. T..
Narrow (Mini) MixerModule A-138n is a simple four channel mixer, which can be used with either control voltages or audio signals. Each of the four inputs has an attenuator available. The output is twice available (two sockets, hard-wired like a multiple).The module is the slim version of module A-13..
Performance Mixer Output ModuleA-138o is the output module that can be combined with one or more A-138p.level controls for Left, Right and Auxoutput sockets for Left, Right and Aux (3.5 mm mono sockets)A-138o requires at least ine A-138p (no stand-alone use)http://www.doepfer.de/A138p.htm20 mA +12V2..
Modules A-138p/o are used to built a simple performance mixer (instead of an external stand-alone mixer). Module A-138p is the 4-fold input module, A-138o is the output module that can be combined with one or more A-138p.A-138p features:4 channelscontrols and inputs for each channelinput (3.5 mm mon..
two-channel headphone amplifiertwo audio inputs with level controlsInput 1 is normalled to Input 2common loudness/master level controlheadphone output (stereo 1/4" jack socket)max. output power ~ 2 W per channel (@ 8 Ohm load)DC coupled inputs and outputs (i.e. also useful for other applications lik..
module a-185-2 is a precision control voltage adder/buffer. precision means that the amplification of the inputs without attenuators is exactly 1.00 and is suitable to add control voltages for the pitch control of vcos (e.g. from keyboard + sequencer 1 + sequencer 2).the module is equipped with four..
Mixer Module6 to 1 Analog True Stereo Mixer for modular level signalsSingle knob panning from Stereo to Mono to Inverse Stereo with CV control 1 x LFO for auto-panning and Leslie effect4 x true stereo effects to choose from :Reverb - Delay - Chorus (soft) - Chorus (hard)current draw : 80mA @ +12V / ..
FeaturesCV Audio Manipulator4x AttenuinvertersOffset Generator (+/- 10V)4 to 3 Mixer (it can also work as a buffered splitter)Voltage Controlled LFO with range from 30sec up to 440HzPulserizer effect (will distort and convert signals into a square wave)Power Consumption: 40mA @ +12V , 27mA @ -12V23m..
COMPACT, PERFORMANCE ORIENTED 4 CHANNEL STEREO MIXER WITH SIDECHAIN DUCKING4 channel stereo performance mixerDaltonic friendly - the LEDs are blue/red instead of red/greenChannel 1 features a stereo input jack, Channels 2/3/4 are dual monoOn-board compressor with external sidechain control voltage o..