Percussa - Super Signal Processor (SSP)

Included DSP Modules

Build your own patches on the SSP using the following DSP modules that come with the SSP:

• Wavetable Oscillator with true 3D morphing (XYZ) and cloud features
• Sampler with Layering features
• LFO with multiple waveforms (sine, saw, square, triangle)
• Variable Frequency Noise
• DC generator
• Enveloped Generator with Exponential A and DR
• Waveshaper
• Comb Filter
• State Variable Filter
• Step Sequencer
• Granular processor with live input
• Sampler module (with separate parameters and modulation inputs for the 8 slots )
• Simple delay
• Bit crusher
• Physical modeling membrane
• Arpeggiator
• Envelope Follower
• Bus module
• Develop/load your own VST plugins (compiled for Linux/Arm)
• Switcher Module
• Reverb and Delay
• Macro Module
• 
  
• 
  
• 
  
• 
  
• 
  

• Percussa SSP Specifications Overview

  Size	60HP 35mm behind panel
  Inputs/Outputs	16 in / 8 out via high quality AKM converters 32 bit @ 48kHz, 96kHz, 192kHz sample rate all I/O DC coupled, -5V to +5V Low-noise power supplies and op-amp stages, featuring 0.1% resistors
  USB support	Flash drives and MIDI controllers w/ MPE support + USB audio streaming
  CPU power	quad-core ARM cortex A17 @ 1.8GHz
  Onboard storage	2 GB RAM + 16GB Flash
  Encoders and keys	4 encoders + 16 soft keys
  Display	1600x480 pixel IPS display, full colour
  USB Connectivity	2x USB Host + 1x USB device port
  SD card slot	Yes, delivered with Sandisk Extreme Card
  Comes with patches and sounds	Yes
  Path editing	Full patching on SSP using 2D patching grid
  Patch, Preset and File storage	Limited by size of SD card or USB flash drive
  VST support	Develop/load your own VST plugins (compiled for Linux/ARM)
  Multichannel recording	Record 16 inputs and/or 8 outputs to disk (flash)
  Power	850 ma @ +12v and 250 ma @ -12v consumption standard 16-pin eurorack power connector