Split Flex gives you the possibility for connecting two pedals to the power supply using one outlet only. Two cables in lengths 30 and 50cm are connected to the plug on the power supply side. On the other end they are terminated with 5,5/2,1mm centre negative angled DC plugs which is the most common..
This Flex cable makes it possible to power three pedals using only one outlet of the power supply. You need to make sure that the three pedals can all be powered by the same voltage and that they all use the most common 5,5/2,1mm centre negative DC plug, the BOSS standard. On this daisy chain the fi..
Type 2 – centre positive 5,5/2,1mm DC plugype 2 Flex cables are red and fitted with a centre positive 5,5/2,1mm DC plug. This standard is less popular but also widely used in older or positive ground pedals as for example the ’69 Pedal, Soulbender or Octafuzz from Fulltone or Voodoo Lab’s Proctavia...
Type 3 Flex cable is yellow and fitted with a centre negative 5,5/2,5mm DC plug. This is the cable you need if you want to power a Line6 Stomp from the CIOKS DC7 – simply combine this Flex cable with the Parallel Adapter Flex and you are good to go.Apart from the Line6 Stomp pedals, this type of plu..
4030 CIOKS Flex 4 – 30cm (12″) with 5,5/2,5mm centre positive angled DC plug (green)Type 4 Flex cables are green and fitted with a centre positive 5,5/2,5mm DC plug. This Flex cable type is nowdays mainly used to power all Eventide Factor and H9 pedals and is widely used for many A..
6030 CIOKS Flex 6 – 30cm (12″) with 9V battery snap (black)Type 6 Flex cables are black and fitted with a 9V battery snap or clip if you like. This Flex cable should be used with 9V battery powered pedals which don’t have an adapter input socket e.g. vintage Wah pedals or some MXR ..
This frame is the small version of the low-cost cases A-100LC6/LC9, which is identical in construction to the A-100LC6, but has only one row with 84HP available for the installation of modules. It is equipped with a power supply (1200mA). For space reasons, the power supply of DIY-Kit #1 is used, as..
Affordable version of the A-100 suitcase for mounting Eurorack.6 U (2 x 3U)usable width: 84 HPusable depth for modules: 100 mmcontains: 1 power supply A-100PSU3 (2000mA), 2 bus boards6U frame 28 connectors for modules 445 mm x 275 mm x 160 mm..
Affordable version of the A-100 suitcase for mounting Eurorack.9 U (3 x 3U)useable width: 84 HPuseable depth for modules: 100 mmcontains: 1 power supply A-100PSU3 (2000mA), 3 bus boards(The case is equipped with the new bus board V6 and not the old model as shown in the pictures) 9U f..
The A-100 Low Cost Base has the same width as the A-100 Low Cost Cases (A-100LC6/LC9) and is planned as a base frame for the A-100 Low Cost Cases. But it can be used also as a stand alone unit. One power supply (PSU2) and two bus boards are built in. The A-100 Low Cost Base has two rows for modules ..
Doepfer A-130-4 Quad VCAModule A-130-4 contains four linear VCAs with a common level control section for all four VCAs. It can be used for all applications of simultaneous amplitude/level control of up to four different audio or CV signals. A-130-4 is the replacement of the no longer available modul..
Polyphonic voltage controlled mixer / Suboctave generatorModule A-135-5 is a combination of a voltage controlled polyphonic mixer and a polyphonic suboctave generator. It is made of 12 voltage controlled amplifiers (VCAs) which are arranged in form of a 4x3 matrix. Herewith up to three four-voice po..